Products
All Products
Product Features
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396.
- CPX® branded solid British design.
- Control and highly visible indication panel.
- All interconnecting pipework is included.
- Outlet pipework for connecting to the pipeline.
- Anti-vibration mounts on all compressors.
- Isolator to each pump unit as standard.
- Alarm and BMS outputs for remote status indication.
- Digital display touchscreen with a user interface.
- 400Kpa, 700Kpa and 1000Kpa output versions available.
- All settings are factory set and verified with certificates of inspection.
- Each plant has a full warranty of 12 months from its commission date.
Product Features
- NNMS® branded solid British design
- Control and obvious indication panel
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low-pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Product Features
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396
- NNMS® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipelines
- -vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
- Options – Touchscreen, BMS Modbus, Digital Outputs, SMS Texting Alarms, Service Reminders
Product Features
- The NNMS Modular Wall & Ceiling System is a full metal structure to which solid mineral surface panels, doors and in-built accessories can be applied. Our cutting-edge Technology is suitable for Modular Operation Theatres, central sterile service departments and medical intensive care units.
- The solid mineral surface is an innovative anti-bacterial component with a hygienic performance.
- The modular wall system is manufactured using high-quality materials and offered in a wide range of colours with remarkable aesthetic characteristics.
- The system provides clean, quiet, and reduced installation time, which is also ideal for maintenance. There are no sharp edges, and the entire structure is free from protrusions and grout joints. All vertical joints are quickly removable and bacteria-resistant non-toxic silicon gaskets.
- The gasket between the panel and substructure provides superior airtightness and increased efficiency of the air handing unit.
- The panel system is fire resistant and conforms to EL 60 norms. X-Ray protection barrier lead plates up to 2mm can be installed as per customer requirements.
Product Features
- All Behead Units from NNMS are manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- They are designed and built with a view to providing smooth lines, a stylish finish and pleasing aesthetics in order to blend into the room décor.
- The unit is in accordance with the British Department of Health Memorandum No 2015 (HTM 08-03).
- Built from individually heat-treated extruded aluminum sections, the unit provides separate compartments for medical gases and electrical services.
- Furthermore, the gas compartment is ventilated to prevent a buildup of gas inside the unit.
Product Features
- No more trailing leads or hoses to restrict movement within the department, all equipment is attached via short connecting hoses or cables to integral hook-up points.
- The fully encapsulated system, incorporates modular service boxes, to ensure the maintenance and general use are unproblematic.
- Single or two-piece and arm assemblies, motorised or static, the equipment can now be located at the point of use with simplicity.
- Fully equipped as desired, with high and low voltage supplies, medical gas outlet points, communication points, and miscellaneous.
- Factory tested supplied to the customer in modular format
Product Features
- No more trailing leads or hoses to restrict movement within the department, all equipment is attached via short connecting hoses or cables to integral hook-up points.
- The fully encapsulated system, incorporates modular service boxes, to ensure the maintenance and general use are unproblematic.
- Single or two-piece and arm assemblies, motorised or static, the equipment can now be located at the point of use with simplicity.
- Fully equipped as desired, with high and low voltage supplies, medical gas outlet points, communication points, and miscellaneous.
- Factory tested supplied to the customer in modular format.
Product Features
- No more trailing leads or hoses to restrict movement within the department, all equipment is attached via short connecting hoses or cables to integral hook-up points.
- The fully encapsulated system, incorporates modular service boxes, to ensure the maintenance and general use are unproblematic.
- Single or two-piece and arm assemblies, motorised or static, the equipment can now be located at the point of use with simplicity.
- Fully equipped as desired, with high and low voltage supplies, medical gas outlet points, communication points, and miscellaneous.
- Factory tested supplied to the customer in modular format
Product Features
- Manufactured and tested according to the European Pressure Equipment Directive or to the regulations of other countries.
- Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres.
- Low evaporation rate.
- Ergonomic layout of instruments and controls for ease of use.
- Manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
- High quality is ensured by measures, including a quality management system complying to ISO 9001.
- VIE Control Panels available 500I/min-6000l/min.
Product Features
- A standard system would feature a central control panel with a header assembly.
- Digital display of bottle pressure for duty and standby banks.
- Electronic control with alarm and BMS outputs for remote status indication.
- The unit is designed for wall mounting as standard, however, options available include floor-mounted assemblies and formats to suit customer requirements.
- Also available is a high flow capable of providing a distribution flow rate up to 2500l/min.
- Options – Touchscreen, BMS Modbus Digital Outputs, SMS Texting Alarm
- Configurations – Third Source, Back to Back, Double Stack Heading
Product Features
- Pressure is monitored via a transducer in the pipeline downstream from the last AVSU, this pressure is monitored for both high and low pressure (low only for vacuum).
- A fault on the cabling between the pressure transducer and alarm panel would result in a system fault alarm and as a result, the integrity of the NNMS cabling is incomparable.
Product Features
-
The AVSU can be installed as a flush or surface mounted.
-
Gas Identification is located on the body of the AVSU behind the window and is immovable.
-
A large viewing window to the door gives an immediate indication of Gas Identification located on the body of AVSU, valve position, and flow direction.
-
In an emergency, this can be gained by pulling the window thus allowing access to the valve. The anti-tamper device can be fitted to the window and connected to our Digital Alarm and BMS
Product Features
- Centralized source of Oxygen up to 96% +/- 3% purity available in a variety of configurations
- The stations are readily equipped with O2 analysers.
- Complete with an Alarm.
- A Digital Touchscreen control with factory preset configuration.
- Easy-to-read images.
- A bespoke design service is available.
- Manufactured in our UK factory, fully tested, and ready to install.
- ISO 10083 and conforms to HTM and EN Standards.
Product Features
- The Terminal Units provided by NNMS are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems.
- The units comprise a first fix, second fix, and second fix valve assembly and connect medical appliances to the gas supply system.
- The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead, and pendant, and are supplied with a 3-year warranty.
- Test plugs are included with flush, surface, and bedhead types for first-fix pressure testing on site.
All Products